10
1. Transmission window
2. Liquid crystal display
3. Mode select key:
Select from among the three functions: cooling, heating and dehumidifying. The fast key function
indicates the above operating modes in a cycle when the key is pressed without being released.
However, the transmission icon will not appear until the key is released and the confirmed mode is
transmitted.
4. Setting keys for room temperature:
The set temperature will rise by 1°F when the
key is pressed once and the set temperature will
fall by 1°F when the
key is pressed once. Both keys have the fast key function and can make the set
temperature rise or fall continuously when the keys are pressed without release.
5. Power key:
When this key is pressed, the memorized modes and other information about temperature, speed,
direction of airflow, sleep, etc., in the remote control will be transmitted to the unit and it will operate
correspondingly. When the key is pressed again, the main unit will stop immediately.
6. Sleep key
When this key is pressed, the air flow of the unit changes into sleep mode (low speed).
(1) Press “SLEEP” key, set sleep function; press again, and cancel sleep setting.
(2) The temperature will increase 2°F half an hour after setting sleep function, and will
increase at most 4°F every two hours after that.
(3) When the main power supply is cut off, the sleep function setting will be cancelled
automatically.
(4) When you turn off the unit, sleep function setting will be cancelled automatically.
REMOTE CONTROL FUNCTIONS
ZoneAire Compact I & O_98081002_02.indd 10
3/16/2018 11:13:25 AM