920-120-00 (1-05)
Primary Area:
Condensation from
the chassis collects in the sleeve in
this area. The Primary Area is the
preferred installation location.
1/2" O.D.
Tube
Gasket
Mounting
Plate
Wall Sleeve bottom
Foam
Gasket
Mounting Plate
Tube
Sleeve
Bottom
Screws
Figure 2
Figure 1
If the drain must be located in the
secondary area, the foam insulation
must be cut away and removed to
allow access to the drain.
Foam Gasket
Cover plate
1/2" O.D. Tube
Mounting Plate
Foam Gasket
Back of wall sleeve
DETAIL B
DETAIL A
Note: The cover plate and external drain tube
assembly may be placed on either side of the
wall sleeve. Before tightening the screws,
make sure the tubes' position will allow
the wall sleeve to fi t through the wall.
Ov
er
fl ow
Sl
ot
s
Figure 3
PXDR10 DRAIN KIT
PXDR10 DRAIN KIT
