Owner’s & Installation Manual
19
ENGLISH
Installation instruction
If pressing button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it
enters into user setup mode.
Please press more than 3 seconds for
sure.
1
Function Code
Zone type value
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
Function code 13.
Ex) Setting the Zone Type as "New"
2
Select Zone Type by pressing
button
(00:Old, 01:New)
3
Press button to save or release.
4
Installer Setting - Zone Type Setting
This function is only available on some products.
It is possible to setup zone new type or old one of the product which is available to install the damper
controller.
If you set zone number incorrectly, the product may malfunction especially in zone control.
This function must carried out by a certificated-technician.
CAUTION
