Checklist
•
•
•
•
•
Power ON Source, then Power ON speakers.
•
•
•
•
MAIN OUTPUT
Source - modeling preamp or mixer
Stereo ASM-12 Speakers (Note: set up is the same for ASC-12 Speakers)
Set-up Diagram
Connect the Source’s Main Right Output to the Input
of the Right Main Speaker.
Turn down the Sources’s volume.
Bring the Source’s volume up to normal operating level.
Adjust the Level controls on the ASM-12/ASC-12.
Do not adjust the Level so high that the Red LIMIT LED is
constantly lit.
Make certain loudspeakers are Powered OFF and Levels
turned down.
Connect the Source’s Main Left Output to the Input
of the Left Main Speaker.
Set the Low Cut switch to ON if you want less bass response
and greater tonal clarity.
