FRIEDLAND D913 Libra +100m, Instruction Manual

Page: 6 / 49

5
Programming procedure
Learn mode
To enable your chime to learn the identity of your
bell push:
¬
●
Press the
●
button and keep it pressed. Each
Icon will light in turn. When the Icon you want is
lit, release the button.
¬
●
While the Icon you have selected is lit, operate
your push. The chime will sound. The Icon will flash.
Unlearn procedure
If you want to remove a push from the chime’s
memory:
¬
●
Press the
●
button and keep it pressed.
Each Icon will light in turn. When the Icon
associated with the push to be un-learnt is
lit, release the button.
¬
●
Press and hold down both
●
& buttons,
until a ‘beep’ sound is heard.
Changing the tune
Operate the push. While the icon is flashing,
press the button. Press the button again
and the tune will change. Repeat until the
tune you want plays.
A short push of the
●
button will flash the icon that
was last in use.
Recall function
Mount using either the double sided
adhesive pad, or the screws provided
(see Fig 6). Test your push before
fixing. Avoid fixing to metal
structures.
Mount the bell push
Chime sounds
The Chime can be free standing or wall mounted
using the wall bracket provided. If wall mounting is
preferred, screw the bracket to the wall (see Fig 7).
The Chime hooks onto the wall bracket as illustrated.
Chime position
To hear the chime sounds without operating the
bell push, press the button. Press the button
again and the tune will change.
Fig. 6
Fig. 7
Changing the tune