Fridgmaster MUL49102, How To Use Manual

Page: 7 / 12

7
Changing the internal light
1 Before carrying out the bulb replacement, always switch off and
disconnect the electrical supply.
2 Use a small screwdriver to undo the screw securing the lamp cover.
3
To remove the lamp cover, grasp the extended tab between thumb and
forefinger and push gently toward the back of the cabinet.
4 Remove the old bulb by unscrewing in an anti-clockwise direction.
5
Replace with a new bulb (15w) by screwing it in a clockwise direction
making sure that it is secure in the bulb holder.
6 Replace the translucent light cover and re-secure with the screw
before re-connecting your larder fridge to the electrical supply and
switch on.
MAINTENANCE
The larder fridge is not working
Check it is plugged in and switched on. Check that the fuse in the plug
has not blown. Plug in another appliance, such as a lamp, to see if the
socket is working.
Condensation appears on the outside of the
larder fridge
This may be due to a change in the room temperature. Wipe off
any residue of moisture. If the problem continues call the customer
service department.
Noises
You may hear some unusual noises from time to time. See ‘Noises inside
the larder fridge’ on page 5.
If you are not able to identify and eliminate the faults according to
the above recommendations, contact the customer service department,
advising the model number of the appliance which is shown on the back
of the rating plate.
Do not attempt to repair your larder fridge yourself as it might endanger
you and others.
Moving your larder fridge
Location
Do not locate your larder fridge or near a heat source, eg. cooker, boiler
or radiator. Also avoid direct sunlight.
Levelling the larder fridge
Make sure the larder fridge is level. Use the rotating levelling feet at
the front. If the larder fridge is not level, the doors and magnetic seal
alignments will be affected.
Do not turn on the larder fridge for two hours
After the larder fridge is in place it needs to be left for two hours.
The coolant fluid needs time to settle.
Installation
Don’t cover or block the vents or grilles of your appliance.
Servicing
Repairs and maintenance of the appliance should only be performed
by an authorised, qualified technician.
TROUBLESHOOTING