8
Moving your refrigerator
Location
Do not locate your refrigerator near a heat source, eg. cooker, boiler or
radiator. Also avoid direct sunlight.
Levelling the refrigerator
Make sure the refrigerator is level. Use the rotating levelling feet at
the front. If the refrigerator is not level, the doors and magnetic seal
alignments will be affected.
Do not turn on the refrigerator for two hours
After the refrigerator is in place it needs to be left for two hours.
The coolant fluid needs time to settle.
Installation
Don’t cover or block the vents or grilles of your appliance.
Servicing
Repairs and maintenance of the appliance should only be performed
by an authorised, qualified technician.
MAINTENANCE
The refrigerator is not working
Check it is plugged in and switched on. Check that the fuse in the plug
has not blown. Plug in another appliance, such as a lamp, to see if the
socket is working.
Condensation appears on the outside of
the refrigerator
This may be due to a change in the room temperature. Wipe off any
residue of moisture. If the problem continues call the Customer
Service department.
Noises
You may hear some unusual noises from time to time. See ‘Noises inside
the refrigerator’ on page 5.
If you are not able to identify and eliminate the faults according to the
above recommendations, contact the Customer Service department,
advising of model number of the appliance which is shown on the back
of the rating plate.
Do not attempt to repair your refrigerator yourself as it might endanger
you and others.
TROUBLESHOOTING
