7
REVERSING THE DOOR SWING
The door of your refrigerator can be reversed.
Tools required
When trying to gain access to the base of the
fridge, do not tip it back at more than a 45° angle.
Rest the fridge on soft foam packaging or similar
material to avoid damaging the back of the appliance
Remove the four blanking plates from the top of the
the screws underneath with a Phillips screwdriver.
Remove the pin from the bracket and replace it into
the same hole from the other side.
2
3
appliance, secure it with the three bolts, and screw
the foot into position.
7
Remove the hinge pin from position 1 and replace
it in position 2. Place the hinge on the opposite side
of the cabinet, secure it with the three bolts, and
screw in the foot into position.
Position 2
6
8
Check the door is
e
r
o
f
e
b
s
e
d
i
s
ll
a
n
o
d
e
s
o
l
c
l
a
e
s
e
h
t
t
a
h
t
d
n
a
y
tightening hinge bolts. Replace the lid and screws.
r
o
o
d
e
h
t
f
I
seal
t
o
n
s
e
o
d
against the cabinet, on
any side, warm the seal
with hot water and tease
it into position. This can be
done using a hair dryer but
care must be taken not to
overheat the seal or burn
your hands.
Use the 8mm socket or spanner to remove the three
Remove the fridge door.
bolts above the door hinge. Lift off the bracket.
Tilt the fridge back, no more than 45°, to
access the bottom hinge and feet. Remove the feet
and the bolts securing the right hand hinge plate
and the left hand fixing plate.
5
Remove the hinge insert plate from the bottom of
fridge door . Replace the plate on
the opposite side.
4
. Philips style screwdriver
. Flat bladed screwdriver
. 8mm socket
.10mm socket or spanner
. Ensure the fridge is unplugged and empty.
. We recommend you have someone to assist you
aligned horizontally and verically
is
fridge
1