Installing Your N
Positioning:
Position the appliance away from sou
of stoves, radiators, direct sunlight etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned as specified on the rating plate.
This appliance performs well
ST
. The appliance may not work properly
if left at a temperature above or below the
indicated range.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Appliance must not be exposed
Sufficient air must be allowed to circulate
in the lower rear section of
poor air circulation can affect performance
Built-in appliance should be positioned
away from heat sources such as stoves,
fires or heaters.
Installation instructions:
Before installing, carefully
read
the
instruction in order to avoid a certain
number of problems.
This is Dimensions of mounting slot
New Appliance
away from sources
direct sunlight etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned as specified on the rating plate.
This appliance performs well from
SN to
may not work properly
if left at a temperature above or below the
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
must not be exposed to rain.
Sufficient air must be allowed to circulate
in the lower rear section of appliance, as
poor air circulation can affect performance.
should be positioned
away from heat sources such as stoves,
Installation instructions:
installing,
carefully read the
instruction in order to avoid a certain
Dimensions of mounting slot.
Follow the steps in the
guide provided.
Note:
Your product is designed and built
for domestic household use only. The
product must be correctly
installed,
located and operated in accordance with
the instructions contained in
Instructions guide provided.
Reversing the fridge door
The side at which the door opens can be
changed, from the right side (as supplied) to
the left side, if the installation site requires.
Warning! When reversing the door,
appliance must not be connected to the
mains. Ensure that the plug is removed
the mains socket..
Tools you will need(Not provided):
Philips Screwdriver &
Slotted Screwdriver
Wrench(
Note:
When required, tilt the refrigerator back
order to gain access to the base, you
should rest the appliance
packaging or similar material to avoid
damaging
the
backboard
of
the
refrigerator. To reverse the door, the
following
steps
are
generally
recommended.
1. Stand the refrigerator upright. Open the
door, remove the upper hinge cover
and right).
Remove the lower screw hole
cover for the cabinet. Remove the screw
hole cover for the door.
in the installation
Your product is designed and built
for domestic household use only. The
be
correctly installed,
located and operated in accordance with
the instructions contained in the User
provided.
door
The side at which the door opens can be
changed, from the right side (as supplied) to
the left side, if the installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
that the plug is removed from
Tools you will need(Not provided):
Wrench(8mm)
When required, tilt the refrigerator back in
order to gain access to the base, you
appliance on soft foam
packaging or similar material to avoid
damaging
the
backboard
of
the
refrigerator. To reverse the door, the
following
steps
are
generally
1. Stand the refrigerator upright. Open the
remove the upper hinge cover (left
Remove the lower screw hole
Remove the screw
6
Summary of Contents for MBUR60121MF
Page 1: ...MODEL MBUR60121MF...
