Frictionless World Dirty Hand Tools 103400 Operation Manual Download Page 4

Important Safety Information

WARNING:  

Read and thoroughly understand all instructions 

and safety information before assembling or operating this Power 

Post Driver. Failure to do so may cause serious injury or death. 

Do not allow anyone to operate this equipment who has not read 

this manual. As with all power equipment, a Power Post Driver 

can be dangerous if assembled or used improperly. Do not operate 

this equipment if you have doubts or questions concerning safe 

operation. 

Call our customer service department at 

720-287-5182,  

1-877-487-8275, 

 or visit

 

www.dirtyhandtools.com

 if you have any 

questions or concerns about the safe operation of this equipment.

Intended Use

Do Not Use the Power Post Driver for any purpose other than 

for which it was designed. The Power Post Driver was designed to 

drive fence posts, ground rods, form pins, and other similar items 

into the ground. Any other use is unauthorized and may result in 

serious injury or death.

Personal Protective Equipment

When operating this Power Post Driver it is essential that you wear 

safety gear including goggles or safety glasses, adequate clothing 

and tight fitting gloves. Always wear ear plugs or sound deafening 

headphones to protect against hearing loss when operating this 

Power Post Driver. Always wear sturdy footwear. Never wear 

sandals, sneakers or open shoes, and never operate the Power Post 

Driver with bare feet. Bystanders should wear safety glasses and 

hearing protection while in the presence of this power tool during 

operation.

Whenever you leave the operation position to raise or position a 

fence post or make other adjustments always shut off the engine. 

4

!

WARNING

!

DANGER

!

CAUTION

Summary of Contents for Dirty Hand Tools 103400





















Reviews: