Check the contents.
When assembling, it is advisable to use special gloves in order to avoid any bad cut on hands.
Insert the spout in the upper orifi ce and fi x it with the provided bolts · Fig. 1
Connect the hose of length 1200 mm. to the spout.
Assemble the drain valve · Fig. 2
Place the drum labeled “Non-potable water” under the tank of the sink.
Connect the drainage hose to the waste valve and insert the opposite end in the drum. Make sure
that it is positioned in elbow shape. Fig. 3
Place the non-labeled drum under the sink drainer. Then insert the hose of length 1450 mm. in the
neck of the drum.
Remove the protective plastic from the steel.
ASSEMBLY
Sink unit with frame. (spare not available)
461004 - Turning tap 160x180x1/2” (30mm nut).
461214 – Stainless steel braided hose F-F ½” 1200 mm
461216 - Stainless steel braided hose F-F ½” 1200 mm
454202 - 2 ½” Valve with trough for 500mm sink.
454260 - Flexible drainage pipe for self-contained basin.
461426 - Stackable translucent 20 l tank for water
CONTENTS & AVAILABLE SPARES
Other spares:
460412 Hydraulic pedal high fl ow
461432 - “Not drinking water” vinyl adhesive for tank.
485002 - Swivel wheel with brake
485004 - Swivel wheel without brake
085006 Kit for fi xing castor to tube 40x40
477668 –Fiber chock for sliding door
477670 – Fitting set for sliding doors (bearings)
Read the instructions before connecting the device and store them in a safe place for
reference.
DO NOT DRINK WATER FROM THE SINK
DO NOT DRINK WATER FROM THE SINK.
This sink cannot replace any items that require hot and cold running water at the facilities in accor-
dance with the applicable laws.
CLEANING AND STERILIZATION
• Wash both tanks with plenty of drinking water.
• Sterilize before the fi rst use of each day, by adding a sterilizing product approved for drinking
water according to the instructions of the manufacturer. Feed all the circuit with the water and the
sterilizing product stepping on the button until the tank is empty.
• Then fi ll the tank with drinking water. It is now ready for use.
• Perform this procedure before the start of each day.
SAFETY
• Empty the tank of used water at least once an hour or when is full.
• Empty the tank of drinking water at least once every 6 hours.
• When the device is not being used for a long period of time, empty the tanks, wash them and store
them completely dry.
• Store the containers clean and dry in a dark, dry and healthy area.
• Replace the tanks every six months
SAFETY, CLEANING AND STERILIZATION
Press the push button for supplying water.
USE
This sink cannot replace any items that require hot and cold running water at
the facilities in accordance with the applicable laws
• Use only water and neutral soap when cleaning.
• Wipe with a soft cloth.
• Rinse with plenty of drinking water.
• Dry with a soft cloth.
• Do not use acids or strong detergents and do not rub with a scourer or spatula.
MAINTENANCE OF STAINLESS STEEL
This device has two years of warranty. An improper use void the warranty of the unit.
WARRANTY
