Eutectic Refrigerators and Freezers
English
23
Climate classification*
ºC
%Hr
3
25
60
4
30
55
5
40
40
•
Work on the electrical system, repairs, or replacements must be done by
FRICON authorized technicians. For assistance, contact the FRICON client
support service.
•
Do not use inappropriate adapters, power strips, or extension cords. They
may cause overheating and burn. The manufacturer will deny any liability for
damages caused to people or objects resulting from noncompliance with this
regulation.
5. Handling and Operation
For proper use, follow the steps below:
1.
Connect the equipment to an electric current for 14 hours without products.
This way the eutectic plates freeze completely. Then, place the products in
the equipment.
2.
After using the equipment (see Autonomy in Table 1), remove the products
and place them in food preservation equipment.
The internal temperature is adjusted by the thermostat. This temperature has
been set by the factory (to position 7) so that the final user does not have to
change the parameters during operation. To adjust the temperature, disconnect
Fig. 2- Location of Characteristics Label
Technical information on characteristics label:
- Series number
- Designation and type of equipment
- Nominal current and electric power
- Nominal voltage and frequency
- Consumption
- Gross and net volume
- Climate classification*
- Refrigerant and quantity used
- Electrical diagram
- Other technical information.
WARNING
Summary of Contents for MBB 125
Page 1: ......
Page 90: ...Mod 217 4 ...