SWX C/D
14
GB
Assembly and operating instructions
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions. The
guarantee is only valid if the product is used
in the manner intended and in accordance
with the instructions.
Application
SWX is a range of fan heaters suitable
for environments with strict demands on
materials and safety. Models are available for
use in dusty or corrosive environments. Fan
heater SWX has a robust design, adapted to
the requirements of harsh environments.
Supplied with air director with individually
adjustable louvres that direct the air flow on
one plane.
The front of SWX C and SWX D can be
opened for easy cleaning.
Protection class: IP65.
SWX C
The fan heater is available in two sizes,
SWXC12 and SWXC22. They have been
adapted specifically for use in corrosive
environments, such as offshore or chemical
industry.
• Meets the requirements for corrosion class
C5-M.
• Uses hot water as the energy medium.
• Casing, air deflector grille and bracket made
of acid-proof stainless steel, EN 1.4404.
• All pipes in the water heater, including
hoses and connections, are made from
stainless acid-proof steel, EN 1.4404.
• Aluminium fins with nano-coating.
• Protection class IP65 – protected against
dust and water jets.
• Removable front panel for fast and easy
cleaning.
• Fitted with draining plugs for removing
dirty water after spraying.
• Supplied without any automation and a
single fan speed.
• Wall bracket supplied for mounting of the
fan heater on the wall for a horizontal air
stream, or in the ceiling for a vertical air
stream.
SWX D
The fan heater is available in two sizes,
SWXD13 and SWXD23. They have been
adapted specifically for use in dusty
environments, such as industrial premises
and joinery mills.
• Uses hot water as the energy medium.
• Casing, air deflector grille and bracket made
of acid-proof stainless steel, EN 1.4404.
• Water coil featuring copper pipes and
aluminium fins.
• Flat fin spacing of 4.2 mm to minimise the
risk of dust and particles clogging up the
water coil.
• Protection class IP65 – protected against
dust and water jets.
• Removable front panel for fast and easy
cleaning.
• Fitted with draining plugs for removing
dirty water after spraying.
• Supplied without any automation and a
single fan speed.
• Wall bracket supplied for mounting of the
fan heater on the wall for a horizontal air
stream, or in the ceiling for a vertical air
stream.
