S
I
U
SLW
29
GENERAL
After removing the packaging, check the integrity and completeness of the contents. If
unsuitable, contact the reseller that sold you the unit.
Frico units must be installed by authorised companies, which issue a declaration of
conformity to the system manager upon the completion of works, in compliance with current
standards and instructions provided by Frico in the instruction manual supplied together with
the unit.
These units have been developed for the air conditioning and/or heating of environments
and must be used in a manner compatible with their performance characteristics. Any
contractual and non-contractual responsibilities of Frico shall be excluded in the event
of damage caused to persons, animals or things due to installation errors, regulation and
maintenance errors, or due to improper use.
In the case of leaking water, move the system's general switch to the "off" position and close
the water taps. Promptly contact professionally qualified personnel and do not personally
intervene on the unit.
If the unit is not used for a long period of time, the following operations must be performed:
• Move the system's general switch to the "off" position
• Close the water valves
• If there is a danger of freezing, make sure the system has been filled with antifreeze,
otherwise empty the system.
Setting the temperature too high or too low is hazardous to health and constitutes a
pointless waste of energy. Avoid direct contact with the air flow for extended periods of time.
Do not keep the room closed for too long. Regularly open the windows to ensure the
correct exchange of air.
This instruction booklet forms an integral part of the unit and must therefore be carefully
stored and ALWAYS kept with the unit, even in the event the unit is transferred to another
owner or user, or transferred to another system. In the event the booklet is damaged or lost,
request another copy from Frico or find it on our website.
Repair and maintenance operations must be performed by qualified installers, in
accordance with the instructions contained in this booklet. Do not modify or tamper with the
unit insofar as hazardous situations may be created, and the manufacturer of the unit shall
not be held responsible for any consequent damage.
Be very careful of contact, due to the risk of burns.
1 General
1.1 General warnings
GB
