140.010-IOM (NOV 2019)
Page 11
IDSC EVAPORATIVE CONDENSERS
INSTALLATION
Table 8c: IDSC steel support dimensions, dual cell
arrangements (side-to-side)
Model
A1
B1
IDSC 0812...
—
—
IDSC 2412...
23 ft, 10 in.
11 ft, 11 3/4 in.
IDSC 2418...
23 ft, 10 in.
18 ft, 4 in.
Table 8d: IDSC steel support dimensions, quad cell
arrangements
Model
A1
B1
IDSC 2424...
23 ft, 10 in.
24 ft, 1 1/2 in.
IDSC 2436...
23 ft, 10 in.
36 ft, 10 in.
Figure 12: End view dimension, in. (mm)
RECEIVING AND INSPECTION
All units are packaged such that they can be removed from
a truck with a crane.
All units are factory tested to ensure safe operation and
quality assembly. Units are packaged and shipped in two
pieces or more, depending on options ordered, for easy
handling and storage at the job site, if required.
NOTICE
Record any unit damage or shortages on the Bill of
Lading and report to the carrier and factory im-
mediately. Shipping and handling damages are not
warranty items.
Take photos of all damaged equipment if possible. Dam
-
aged equipment is the responsibility of the designated
carrier. Do not return to the manufacturer unless prior
approval is given to do so. Confirm that all items listed on
bill of lading are received.
C/L of unit load
Mounting hole
1 5/8 (41)
13/16 (21)
Unit
NOTICE
Refer to the submittal package for specific unit infor
-
mation.
NOTICE
When lifting the unit use only the designated lifting
lugs as detailed on the rigging drawing attached to
the unit at the time of shipping. Always ensure that
the lifting points are balanced so that the unit is level
during lifting.
RIGGING AND HARDWARE
Figure 13: Rigging and hardware parts
C
D
B
A
Callout
Description
A
Lifting lugs
B
Screw pin shackles. A minimum
capacity of 3 tons
C
Spreader bars. A minimum capacity of
10 tons
D
Straps or chains. A minimum capacity
of 3 tons
