100
100
75
75
Step 2A: Clamp Option
1
4
C
F
D
5
6
F
DESK
Tighten
Step 2B: Grommet Option
Step 1:
Make sure there are VERSA holes
(100 x 100mm or 75 x 75mm). Then,
remove the original fixed base of the
monitor. Make sure you are careful
not to scratch the monitor screen.
Parts:
1. Dual monitor arm (1)
2. cable cover (1)
3. anti-slip rubber
clamp
(1)
4. bottom support
clamp
(1)
5. anti-slip rubber
clamp
(4)
6. knob (1)
7. bottom support
grommet
(1)
8. screw (1)
9. anti-slip rubber
grommet
(2)
10. pressure plate (1)
11. knob nut (1)
12. bottom support
verity
(1)
13. block
verity
(2)
A
x4
M4x12mm
B
x4
M5x12mm
C
x3
M6x12mm
D
x2
M6x10mm
F
x8
G
x1
4X4
H
x1
5X5
C
x3
D
x2
F
x1
4X4
C
x3
F
x1
4X4
8
7
1
C
F
DESK
Size of the hole:8.5-70mm
3
9
10
DESK
11
Tighten
Use supplied allen wrench
to attach to bottom
support
clamp
with M6x
12mm screws (3).
1
2
3
4
Attach anti-slip
rubber
clamp
to
the bottom of the
monitor arm.
3
Using the allen wrench, attach
the knob to the bottom
support using M6x 10mm (2)
screws. Place anti-slip rubber
on top of the installed knob.
Insert desktop in the gap
between the monitor arm
and the bottom support.
Place the cable cover over
exposed cables.
Fits worksurface
thickness:
3/4” - 4”
Insert screw into bottom support
grommet
. Use allen wrench to
attach bottom support
grommet
to monitor arm by using M6x
16mm screws (3).
Attach monitor arm to desk, by
inserting the base with the screw
into the predrilled hole. Before you
merge your monitor arm and your
desk, make sure you are using the
anti-slip rubber
grommet
.
Attach anti-slip rubber
grommets
(2)
to the pressure plate. Attach
the pressure plate to the bottom
of the worksurface by screwing
everything together with the
knob nut.
MONITOR ARM
DUAL
INSTALLATION
CLAMP
GROMMET
VERITY
1
2
3
Fits worksurface
thickness:
3/4” - 4”
NOTE
C
x3
D
x2
F
x1
4X4
3
5
6
8
7
9
10
11
2
4
12
13
