manualshive.com logo in svg

Fri-Jado MCC-120 H, Service Manual, Page: 2 / 126

Share
Download
Fri-Jado MCC-120 H Service Manual Download Page 2

Page 2 

Rev.5 Service Manual MCC Hot USA 20220500

Version

Issue date

Remarks

dd/mm/yy

Rev 1

01-06-2020

First release based on Self Serve

Rev 2

03-05-2021

Adding Full Serve 

Rev 3

01-06-2021

Adjusting controller hot/cold

Rev 4

01-04-2022

Addition multiple Shelfs version, electrical schematics revision

Rev 5

July 2022

Change to EU and USA manual
ERC Alternatives replacement
Adding FS element replacement

KEEP THIS USER MANUAL FOR FUTURE USE

© 2022 Fri-Jado B.V., Oud Gastel, The Netherlands. 
We refer to our General Terms and Conditions for Sales and Delivery that are available upon request.
The manufacturer does not accept any liability for damage or injury caused by failing to adhere to these 

regulations or by not observing the usual caution or care in actions, operation, maintenance or repair 

activities, even if not explicitly described in this manual.
As a result of constant commitment to improvement, it may happen that your unit deviates in detail from 

what is described in this manual.  For this reason, the given instructions are only a guideline for the 

installation, use, maintenance and repair of the unit referred to in this manual.
This manual has been composed with the utmost care.  The manufacturer shall, however, not be held 

responsible for any mistakes in this manual nor for any consequences thereof. 

All rights are reserved and nothing in this manual may be reproduced and/or made public in any way.
Modifications:

In case of unauthorized modifications in or on the unit, every liability on the part of the manufacturer 

becomes null and void.

Summary of Contents for MCC-120 H































































































































Reviews:

No comments