Fri-Jado Cold MCC, Service Manual

Page: 4 / 147

Page 4 Rev 3 Service Manual MCC Hot / Cold 2021
1.0
Introduction
1.1 General
This manual is intended for trained technicians, performing repairs on the MDD
The features and controls are being described, along with directions for the safest and most
efficient way to service these counters.
All pictograms, symbols and drawings in this manual apply to all available MDD models.
1.2 Identification of the unit
The identification plate can be found on the outside of the machine, and contains the following data:
• Name of the supplier or the manufacturer • Model
• Serial number • Year of construction
• Voltage • Frequency
• Power consumption
1.3 Pictograms and symbols
In this manual, the following pictograms and symbols are used:
WARNING symbols:
WARNING WARNING
Possible physical injury or serious Risk of Fire.
damage to the unit,
WARNING WARNING
Hazardous electrical voltage. Danger of getting injured by hot
surfaces.
SAFETY symbols:
SAFETY SAFETY
Wear safety gloves for installation Wear eye protection.
and dismantling.
SAFETY Disposal
ALWAYS Remove power plug from According local regulations
main outlet before working on the unit.
SAFETY
Clean Hands and/or Tools
Suggestions and recommendations.
Notification Cleaning
Take care off: On regularly interval
Recycling symbol. Reading
Instructions referred to
Minimum room floor area. Part of manual under construction
Pictures or photos to be added