Fri-Jado BC 3-E, User Manual, Page: 21 / 24

BC
EN 21 / 24
6. MALFUNCTIONS AND SERVICE
Before you contact your supplier/dealer in case of a malfunction, there are some items you can
check yourself:

Is the power supply working properly? Check fuses and differential switch.

Has the timer clock been properly set?
Item Malfunction Possible action
Element The heating element
colours red

Remove the plug from the outlet.

Have the fault corrected.
Fan The fan does not rotate

Remove the plug from the outlet.

Open the door.

Remove the rear panel (see section 5.3)
and check if the fan can rotate freely.
Oven The oven does not
become hot

Open and close the door.

Check the fuses and the earth leakage
switch in the meter cupboard.
Steam
(with BC - P only)
No steam injection

Check the water connection.
Door Does not close

Place the oven in a horizontal position
such that the closing pins fall into the
door hinges.

Check if the door switch is not positioned
too far to the outside.
Bottom
(with BC - P only)
The bottom becomes
wet

Reduce the number of steam pulses.
Mains cord Damaged

Replace, see section 6.1
6.1 Replace the mains cord
WARNING
Hazardous electrical voltage.
If the mains cord is damaged, it must be replaced by the manufacturer, his service agent or a
similarly qualified person in order to avoid hazards.