Bake Basic 3/5 - E & P
en / 2-17
9123573_
1007
5.2. Periodic
maintenance
Part
Action
Cleaning
frequency
Exterior
•
Clean the exterior with a small amount of water to which a mild
cleaning agent has been added and a soft brush or sponge.
•
Dry the exterior with a cloth.
•
Use stainless steel cleaning spray for removing stains and to make
the outside shine again.
Weekly
Windows
•
Open the door.
•
Clean the windows with warm soapy water or Fri-Jado Cleaner.
Weekly
Door switch
•
Check if the door switch can move freely (P-model only).
•
Have a door switch that cannot move freely replaced.
•
Clean the visible part of the door switch with a dry cloth.
Weekly
Foil of the operating
panel
•
Check the foil of the operating panel for damage.
•
Replace a torn foil.
Weekly
Mains lead
•
Inspect the electrical cord for damage.
•
Have a defective mains lead replaced by an authorised installer.
Monthly
Rubber door seal
•
Check the rubber door seal for cracks.
•
Replace the rubber if cracked.
Monthly
Rear panel
•
Clean the rear panel and the space behind it.
•
See chapter 5.3).
Monthly
Hinges
•
Spray moving parts with silicone oil.
Every 6 months
5.3.
Clean the rear panel
WARNING
•
Avoid bumping against the fan blades to prevent imbalance.
•
Allow the oven to cool to avoid burning.
•
Remove the plug from the wall socket before removing the rear panel.
1. Remove the racks or baking trays and the beams
supporting the racks or baking trays.
2. Remove the four nuts using the spanner delivered
with the oven and keep them carefully.
3. Pull the rear panel forward and remove it from the
oven.
4. Clean the rear panel with hot water and Fri-Jado
Cleaner. In case of heavy contamination, spray with
Fri-Jado Cleaner, let it soak and rinse thoroughly.
5. Remove dirt from the bottom of the oven and from
the now visible inner rear panel with a soft brush.
6. Place back the rear panel and tighten the four nuts
with the delivered spanner.
