Freund FE-TEL-48G Admin Manual Download Page 170

Page: 170 / 178

159

8.21. PhoneBook->LDAP

To display and configure LDAP phonebook settings.

Name Filter:

The settings used to tell LDAP server what name attributes

to search.

Number Filter:

The settings are used to tell LDAP server what number

attributes to search.

Server:

To configure LDAP server’s address.

Port:

To configure LDAP server’s port.

Base DN:

To configure searching base DN on LDAP server.

User Name:

To configure user name for accessing LDAP server.

Password:

To configure password for accessing LDAP server.

Name Attribute:

To configure which name attributes should be

feedback from LDAP server.

Number Attribute:

To configure which number attributes should be

feedback from LDAP server.

Display Name:

To configure display name on Phone UI when there is

any searching result from LDAP server.

Summary of Contents for FE-TEL-48G



















































































































































































Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands

Freund FE-TEL-48G, Admin Manual

Search results

Summary of Contents for FE-TEL-48G

Reviews:

Related manuals for FE-TEL-48G

Brands by name

Popular brands