background image

FREUND

 

 

 

MANUAL

 

 

1.

 

Getting Started 

 

In this installation guide, we will explain how to install and configure Freund IP-INTEGRA Access 
Control Units and Freund Access Control Readers. 

 

This Installation Guide explains how to install and configure FREUND IP-INTEGRA Access Control 
Units and FREUND ACC-Readers.  

Please  read  this  User  Manual  carefully  before  using  the  product.  Follow  all  instructions  and 
recommendations included herein.  

Any use of the product that is in contradiction with the instructions provided herein may result in 
malfunction, damage, or destruction of the product.  

The manufacturer shall not be liable and responsible for any damage incurred as a result of a use of 
the  product  other  than  that  included  herein,  namely  undue  application  and  disobedience  of  the 
recommendations and warnings in contradiction herewith.  

Any use or connection of the product other than those included herein shall be considered undue 
and the manufacturer shall not be liable for any consequences arisen as a result of such misconduct.  

Moreover, the manufacturer shall not be liable for any damage or destruction of the product incurred 
as a result of misplacement, incompetent installation and/or undue operation and use of the product 
in contradiction herewith.  

The  manufacturer  assumes  no  responsibility  for  any  malfunction,  damage  or  destruction  of  the 
product caused by incompetent replacement of parts or due to the use of reproduction parts or 
components.  

The manufacturer shall not be liable and responsible for any loss or damage incurred as a result of 
a natural disaster or any other unfavorable natural condition.  

The manufacturer shall not be held liable for any damage of the product arising during the shipping 
thereof.  

The manufacturer shall not make any warrant regarding data loss or damage.  

The manufacturer shall not be liable and responsible for any direct or indirect damage incurred as 
a result of a use of the product in contradiction herewith or a failure of the product due to a use in 
contradiction herewith.  

All applicable legal regulations concerning the product installation and use as well as provisions of 
technical standards on electric installations must be obeyed.  

The manufacturer shall not be liable and responsible for damage or destruction of the product or 
damage incurred by the consumer in case the product is used and handled contrary to the said 
regulations and provisions.  

 

Summary of Contents for FE-ACC-INT2D
















Reviews: