5
SKIP ONE
MANUAL
5
SKIP ONE
MANUAL
ASSEMBLING AND DISSASSEMBLING THE TRIKE
Figure 4 shows the rear wheel with shaft locking pin. If this
pin is removed, the rear wheel can be pulled out of the GRP
axle. This makes transport easier, as the overall width of the
trike is reduced from 1400 mm to 1200 mm.
How to fasten the engine on the trike
The engine is placed behind the trike in normal position.
Then the trike is lifted by its front wheel and pushed
towards the engine so that the hook engages in the top
engine brace. Once this is done, the trike is once more
lowered. Now the white clips with the inside guiding pins
still need to be moved into the correct position.
See figure 5.
How to secure the engine on the trike
The two straps must be used for fastening. There are two
straps on the left and right (figure 6) and one in the middle.
Strap on the left and right.
Figure 5
Figure 4
Figure 6
