TOOLS FOR ASSEMBLY
©2014 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
PAGE 2
1. Mark installing holes
Mark the installing position for mounting screws and connecting pipe as illustrated(drawing for
distance of installing holes).
Drawing for distance of installing holes
Before Installation
Read the instruction carefully to be familiar with the tools, fittings and installation procedures to
prevent any unnecessary damage.
Check the fittings follow the fitting form and check whether there is any damage of the product
Check whether the roughing-in on installing position is aligned with the one of product.Realize all
the stipulates for pipelines preposing for water supply.
Because the ceramics is easy to be damaged, please handle it gently and the nut should not be
overtightened.
The
floor of installation position should be flat and hard.
If you want to change the water closet, please turn off water supply and flush the water closet to
make sure no water remains inside the product.Remove the soft pipe for water supply, and unfas-
ten screws. Then remove the water closet and the old gasket and clean the end of the outlet of
drainage.
Note: Please plug the drainage outlet on the floor if you do not install the product at once.
Make sure the water supply has been turned off.
1.
2.
3.
4.
5.
6.
7.
Refer to the newest information of the printed matter. We reserve the rights to change
the features, packing and fittings of the products without notice.
Please keep the installation instruction carefully(including installation procedure, fitting
form, trouble shooting and notice.)
Note: 1.
2.
2″
2″
6 1/4″
1 3/8″~
2 3/8″
7 1
/8″
7 1
/2″
6 1/4″
7 1/2″
1 3/8″~2 3/8″
7 1/8″
