Bill of Materials
33R x 1
100R x 1
1K x 1
3K9 x 4
4K7 x 4
10K x 6
100K x 5
200K x 2
1M x 1
All resistors ¼ watt
metal film.
470pF x 4
100nF x 1
10uF x 3
47uF x 2
You can buy this from
me, or some other
place.
on/off/on
For Tap Tempo
Affixing the Belton ABE-FX
The Belton plugs in to the
Main
PCB using a right angle header (see BOM above). Make sure you
mount the Belton the correct way around (see photos).
Tap Tempo
The momentary switch in the BOM can be used as either push to make or push to break. It’s worth
making sure you know which lug is which before soldering. For this application we need push to
make. See photo below. Connect one lug of the switch to the TAP pad on the PCB, connect the other
lug to ground (Gnd on the PCB). No need to connect the Tap LED to anything other than the PCB.
