15
1.Clean every day
It is recommended that you clean the equipment before and after each
training session. To remove dust from the equipment, use a soft cloth to wet
the following cleaning agent and then wipe all exposed surfaces.
Note: Before using any cleaning agent to clean your fitness equipment, read
and follow the manufacturer's instructions, especially the dilution instructions.
Do not use strong concentrations of concentrate or any acid cleaner directly;
this type of cleaner will corrode the protective layer of the equipment. Do not
spill or spray water or liquid onto any part of the equipment. Wait until the
equipment is completely dry before using the equipment.
Frequent use of the vacuum cleaner to clean the floor underneath the
equipment can prevent dust accumulation from affecting the operation of the
equipment. Use a soft nylon brush to clean the device recesses and foot
pedals.
2.Check daily
Check the equipment at least once a day for the following problems:
Belt slip
Loose fasteners
Abnormal noise
Any other indication that the equipment may need to be repaired.
3.Weekly maintenance
Perform the following maintenance tasks weekly
：
（
1
）
Use water or approved cleaning agents to clean rails and wheels
（
2
）
Use a vacuum cleaner or wet mop to clean the floor under the equipment
（
3
）
Test all the features of the console, including heart rate monitoring
（
4
）
Check that the equipment is securely fastened on the floor. All feet of
the equipment should be in firm contact with the floor, and the equipment
should not be shaken or shaken w
hen in use. If not, please re-level
