freightliner Run Smart ARGOSY, Driver Manual

Page: 56 / 166

clockwise to the red area for warm air. Turn the
switch counterclockwise to the blue area for cool air.
Cancel bunk override mode, if activated, by changing
the sleeper fan speed or temperature setting. The
system will then operate from the sleeper controls.
Seat Controls
NOTE: See Chapter 7 for detailed information
about seat controls and adjustments.
WARNING
Keep hands, tools, and other objects away from
the scissor points under the seats. Failure to do
so could cause personal injury.
The following is a description of adjustments that can
be made to various seats. Not all seats have all of
the adjustments listed below. See
Fig. 5.19 .
•
Backrest tilt
•
Lumbar support
•
Isolator
•
Height adjustment
•
Bottom cushion angle (fore-and-aft bottom
cushion height)
•
Fore-and-aft seat slide (seat track adjustment)
•
Seat tilt
•
Headrest adjustment
Adjustable Steering Column
Controls
The adjustable steering column control button is lo-
cated on the outboard sidewall of the cab. See
Fig. 5.20 .
After adjusting the seat to the desired ride position,
unlock the steering column by pushing and holding
the tilt/telescope button down with the outboard foot.
Tilt the steering column and the steering wheel tele-
scope function to the desired position. Release the
tilt/telescope button to lock the steering wheel and
column in place.
10/26/2000
f910149a
1
2
3
4
5
6
7
8
1. Backrest Tilt
2. Lumbar Support
3. Isolator Feature
4. Height Adjustment
5. Bottom Cushion Angle (fore-and-
aft cushion height)
6. Fore-and-Aft Seat Slide (seat
track adjustment)
7. Seat Tilt
8. Upper Backrest Adjustment
Fig. 5.19, General Seat Adjustments
Driver Controls
5.12