freightliner Custom Classic MT45 2022, Maintenance Manual

Page: 95 / 138

Torque Check with 47 Inch (119 cm) Torque Wrench and Tool DDC DSNCHA018005
Angle View
Extension Angle
(degrees)
Target Torque
[lbf·ft (N·m)]
Tool Setting
[lbf·ft (N·m)]
f422613 11/28/2016
0°
0
350 (475)
296 (401)
f422614 11/28/2016
45°
45 310 (420)
f422668 11/06/2018
60°
60 320 (434)
f422615 11/28/2016
90°
90 350 (475)
f422669 11/06/2018
120°
120 386 (523)
f422616 11/28/2016
135°
135 402 (545)
Table 1, Torque Check with 47 Inch (119 cm) Torque Wrench and Tool DDC DSNCHA018005
5. Install the wheel assemblies. For instructions,
see
Group 40 of the Walk-In Van Chassis Work-
shop Manual .
6. Remove the jack stands and lower the vehicle.
Radial Mounted Brakes
Bendix Calipers
1. Park the vehicle on a level surface, shut down
the engine, and set the parking brake. Chock the
tires.
2. Raise the vehicle and support it on jack stands.
3. Remove all of the wheel assemblies. For instruc-
tions, see
Group 40 of the Walk-In Van Chassis
Workshop Manual .
4. Set a torque wrench to 200 lbf·ft (271 N·m) and
tighten the caliper mounting bolts following the
tightening pattern shown in
Fig. 6 . If they do not
turn, no further work is needed. If they turn, take
the vehicle to an authorized Freightliner dealer to
have all of the caliper bolts on that wheel end
replaced.
Brakes
42
Walk-In Van Chassis Maintenance Manual, October 2019
42/5