freightliner audio 10, Operating Instructions Manual

Page: 17 / 50

Adjusting the sound settings
X
Press the u button.
The display shows the current sound
settings.
X
Select Treble Treble , Bass Bass , Balance Balance or Fader Fader
with the 9 or : button.
X
Adjust the sound with the = or ;
button.
The long bar shows the current setting. The
short bar shows the most recently stored
sound setting.
X
To exit sound settings: press the %
button.
Audio 10 stores the new sound settings.
Setting the language
As standard, Audio 10 uses the language set
in the on-board computer. You can also set
the language independently of the on-board
computer.
X
To select the system menu: press the
i button and confirm with 9 .
Language Language is selected.
X
Press the 9 button to confirm.
The display shows a list of available
languages. The # dot marks the currently
set language.
X
To select a language: use the : button
to select the desired language and confirm
with 9 .
Audio 10 display texts are shown in the
selected language.
Or
X
Press the 9 button to select
Synchronize Languages Synchronize Languages .
Audio 10 display texts are shown in the
selected language on the on-board
computer.
X
To exit the system menu: press the
$ or Õ button.
Resetting to factory settings
You can reset the settings of Audio 10 to the
factory settings. This will delete all personal
data (station memory, phone book etc.).
i
Resetting to factory settings is useful
when you sell the vehicle, for example.
X
To select the system menu: press the
i button and confirm with 9 .
X
Use the : button to select Reset Reset and
confirm with 9 .
A prompt appears in the display asking
whether the data should be deleted.
X
Use the = or ; button to select
Yes Yes or No No and confirm with 9 .
If Yes Yes has been selected, a second prompt
appears in the display asking whether the
data should be deleted.
Basic functions
15
At
a
glan
ce