Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
39 / 78
The second file format is the
.bin
file format. It can be accessed by clicking
Analysis
->
Open measurement folder,
as well
.
For every sequence a
.bin
file is created which
contains all measurements done with this sequence. The results are stored in the order of
measurement.
By clicking
Analysis
->
Open measurement data
these
.bin
files can be opened in a
preview window.
3.5.
Special hardware characteristics
The
lexsyg
measurement system provides a number of additional optional components
which can’t be controlled only by the sequence editor. This section describes the using of
these components.
3.5.1.
EMCCD-camera
The EMCCD camera is basically controlled by its proprietary software. Only the power supply
and the focus movement are controlled by the
Lexsyg Studio
software. The EMCCD control
window can be accessed by clicking
Controls
->
EMCCD
in the menu bar (Figure 19).
Before starting the control software, the camera must be powered up by selecting the
camera on
radio button. The camera is being deactivated by clicking the
camera off
button.
The focus is completely controlled through the sequence editor. In the normal work flow no
additional action must be taken in the control window.
Figure 19: EMCCD control
