Freggia DWSI6158, User Manual

Page: 13 / 72

GB
13
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
Option
Delayed
Start
Half load
(modes)
Tablet Extra Fast Extra Silent
Programs
Prewash X X X - -
Quick 30’ X X X - -
Eco X X X X X
Dual Wash X X X X X
Super 50’ X X X - -
Hygiene X X X - -
Auto Delicate X X X - -
Auto Intensive X X X - -
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
PROGRAM FOLLOW-UP
• When the door is opened after the selected washing program is
completed, the buzzer activation will end and a ‘0’ character is showed
on display (3).
• If the door is opened during washing cycle, the remaining time of the
selected program is shown on the display (3).
• The machine makes a buzzer sound 5 times when the program is
completed.
CHANGING A PROGRAMME
To change the program while a wash program is going.
• Open the door and select a new program by pressing the Program touch
button (
2 ).
• After closing the door, the newly selected new program start from the
point where the original program reached, but with the new parameters
(temperature, cycles) of the new program.
Note: When opening the door of the machine in order to stop the washing
program before it has completed, fi rst carefully open the door slightly in order
to avoid water spillage.
CHANGING A PROGRAMME WITH RESETTING
To cancel a program currently in progress or in a standby position.
• Open the door of the machine. The last selected program will appear on
the display (
3 ).
• Press and hold the program touch button ( 2 ) for 3 seconds. The display (3)
will count from ‘’3 to 1’’ and then show ‘’0:01” to indicate that cancelling
is ready.
• After the door is closed, the discharge process starts. The machine
will empty the water in it for about 30 seconds. When the program is
cancelled, the machine will make a buzzer sound 5 times.
Note: When the door of the machine is opened in order to stop the washing
program before it has completed, fi rst carefully open the door slightly in order
to avoid water spillage.
SWITCHING THE MACHINE OFF
After the program has fi nished, switch the machine off by using the Power On/Off
touch button (
1 ).
Note: To improve the drying performance, after the buzzer sound indicating.
The end of the wash program stops, leave the door of the machine ajar in
order to hasten the drying or select an energy save option before starting a
program to speed up the drying performance.
Note: If the machine door is opened during washing or the power is cut off ,
the machine will restart the program when the door is closed or the power
is restored.
PROGRAM & OPTION COMPARIBILITY
COMPATIBILITY BETWEEN OPTIONS
“-“ Function cannot be selected “x” function can be selected. Extra fast and Extra
silent can’t be selected at the same time.
HOW TO CHANGE FROM “ECO MODE” TO “NORMAL MODE” FOR
INNER LIGHT OPTION
• Open the dishwasher door and press the Power On/Off touch button. ( 1 )
(If it is in OFF position)
• Press ‘’Tablet/Energy Save’’and “Delayed start”.(4) touch buttons
simultaneously for 5 seconds.
• *“IL0” will be shown in the display (3) for 2 seconds to show the “Normal
Mode” is selected for inner light option.
• After “Normal Mode” is selected, the inner light will be ON as long as the
machine is energized and machine door is open.
HOW TO CHANGE FROM “NORMAL MODE” TO “ECO MODE” FOR
INNER LIGHT OPTION
• Open the dishwasher door and press the Power On/Off touch button.(1)
(If it is in OFF position)
• Press ‘’Tablet/Energy Save’’and “Delayed start” (4) touch buttons
simultaneously for 5 seconds.
• “IL1” will be shown in the display (3) for 2 seconds to show the “Eco Mode”
is selected for inner light option. Also inner light turns OFF and ON again
(blinks momentarily) to show this selection is activated.
• After “Eco Mode” is selected, the inner light will be ON for 4min and then
turns OFF. If any user interventionoccurs such as pressing touch buttons,
Eco Mode cycle will start from the beginning (inner light is ON for 4min
and then becomes OFF again)
Note:
Factory setting for inner light are set to ‘’IL1’’.
BUZZER SOUND SET UP
The buzzer sound level can be adjusted.
1- Press the Power On/Off touch button”.(1) (if it is in OFF position).
2- Press the “Tablet/Energy Save” (5) and “Extra Fast/Silent”.(7,8) touch buttons for 3
seconds at the same time to set the level.
3- While pressing “Tablet/Energy Save” (5) and “Extra Fast/Silent”.(7,8) touch buttons
(during 3 seconds.), display shows character of countdowning from 3 to 1.
• If volume adjustment is done the fi rst time, at the end of 3 seconds, “S03”
is shown in the display.
• If volume adjustment is done before, At the end of 5 seconds, the last set
level is shown on the display (from ‘’S00’’ to ‘’S03’’).
The user can increase or decrease the voice level with ’’Tablet’’ and “Extra Fast/Silent”.
(7,8) touch buttons. The characters must be as follows;
• To increase the level of the buzzer sound
1) Press “Extra Fast/silent” touch button. (5)
2) Display (3) changes from “S00” to “S03”
• - To decrease the level of the buzzer sound
1) Press “Tablet/Energy Save” touch button. (5)
2) Display (3) changes from “S03” to “S00”. “S00” means that all buzzers
are off .
4- To exit volume control mode ,switch off the machine.
The last volume level was set is stored in memory.
Note: From sound level ‘’3’’ to ‘’1’’, the loudness level is reduced by stages
depending on the sound level.
Option Half load Tablet Start delay Extra Fast
Extra
Silent
Energy
Save
Half load - OK OK OK OK OK
Tablet OK - OK OK OK OK
Start delay OK OK - OK OK OK
Extra Fast OK OK OK - - OK
Extra Silent OK OK OK - - OK
Energy Save OK OK OK OK OK -