Landing gear Installation Instructions
Nose landing gear Assembly
sparepart name and parameters
A- Grub screws (M3x3 1 pcs)
B-
Wheel lock
C-
Wheel
D-
Nose gear main strut
E-
Steering arm tiller
F-
Grub screw
(M3x3)
G-
Nose gear steering ring
\
Step8
\
\
H- Nose gear steering rod
I - Metal trunion
J -C clip (02.0mm 1 pc)
K-Servo plastic cover(left)
L - Servo plastic cover(right)
M- Screw (PA1.7x8 2pcs)
M1 - Screw (PB1.0x10 3pcs)
J·---
StepQ
Step@
N-Screw
(KA2.6x12 4pcs)
0- Nose gear metal reinforcement plate.
P -Assembled Nose gear
Q-Servo
R-Screw
(PWA2.0x8 2pcs)
S-Steering push rod
T- Nose gear cover
Step@)
EN
StepG,
Step(i)
Nose steering pushrod size
Servo pushrod installing hole
Pushrod diameter: 01.2mm
�O
i=--...,,,;
I----- 65mm --+-I
�
S.'E':SLJaaa;aaa;acaael
(2-9/16")
�gp'
-;::·
=·=
o�
� Note
:
Ensure that the flat side of the gear shaft is facing towards the screw hole before tightening the grub screw in order to ensure
that
the gear is both anchored and facing in the proper direction. Failure to do so may result in the the gear coming loose and falling off.
F-16 Fighting Falcon
lten No.: FJ211
Version No.: FJ211-V01
Please refer to the following diagram to assemble, replace or revise the nose landing gear.
