3
Item No.:FJ214
Step
1
Step
3
As shown in the photo below:
1.Insert the elevator servo cable into the wire channel in the
rear portion of the fuselage.
2
.
Use traction wire to pull the elevator servo cable
to the battery compartment.
3.Install the elevator on the rear
fuselage
and secure
with 4pcs screws (PA2.6x10).
A
D
A-Elevator servo cable
B-Elevator wire channel
C-Elevator
D-Screw
(PA2.6x10 4pcs)
B
C
Rudder servo cable
Step
2
Traction steel wire
Battery compartment
Step
1
As
shown in the photo below:
1.Insert the rudder servo cable through
plastic
mount
;
2
.
Use traction wire to pull the rudder servo cable
to the battery compartment.
3.Install the rudder on the rear fuselage and secure
with 4pcs screws (KA2.6x8).
A-
servo cable
Rudder
B- Plastic mount
C- Rudder
D- Screw
(KA2.6x8 4pcs)
A
B
C
D
To minimize servo connections, the Elevator and Rudder servos’ wires each reach from the servo itself directly to
the receiver. A rigid steel wire hook is included in the box to allow you to pull the servo wires through the model’s
internal fuselage.
PNP lnstallation Instructions
Traction steel wire use instruction
Install Horizontal Stabilizer
Elevator servo cable
Traction steel wire
Battery compartment
Step
2
Install Vertical Stabilizer
Step
3
BAe HAWK