FreeWave Technologies
August 13, 2004
2.4GHz Spread Spectrum Installation Guide
V3.7
LIG0002AC Rev A
7 of 12
WARNING: In Transceivers with firmware version 3.36 and above, Government Rules
must be set to 0 to comply with FCC regulations.
Note: All Frequency Zone settings must be set to “1”.
To access the Government Rules option, press
3
at the Main menu to get to the Radio
Parameters menu. Press
0
to get into the
FreqKey
submenu.
Press
f
for more options within the
FreqKey
menu and then press
4
to get into the Government
Rules option. At the prompt, type
0
to set the radio to comply with FCC rules. Type
1
to set the
radio to comply with 328 rules. Type
2
to set the radio to comply with 440 rules.
6. Repeat the steps above for each transceiver in the network.
