10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
SCREW (C)
ROLLER END CAP
MAIN FRAME
BOLT (D)
15 mm
Qty: 6
FLAT WASHER (E)
8 mm
Qty: 6
top view
BOLT (F)
25 mm
Qty: 2
top view
* NOTE:
Be careful not to pinch any
wires while assembling the masts.
* Be sure to tighten bolts after all are lined up.
Z01
BOLT (D)
MAST
FLAT WASHER (E)
BOLT (F)
ASSEMBLED IN STEP 4-C
HARDWARE BAG CONTENTS :
ASSEMBLY
STEP
ASSEMBLY
STEP 3
SCREW (C)
12 mm
Qty: 2
HARDWARE BAG 3 CONTENTS :
A
Open
HARDWARE BAG 3
.
B
Slide left
ROLLER END CAP
onto
MAIN FRAME
and attach with
SCREW (C).
C.
Repeat on other side.
A.
Open
HARDWARE BAG
B
.
With running deck in lowered position,
place
CONSOLE
on upright masts.
C
. Secure console by partially inserting
3
BOLTS (D)
and 3
FLAT WASHERS
(E)
into side of
LEFT
upright
MAST
.
Remember to partially install
these bolts.
D
.
Gently lift right side of the
CONSOLE
to connect the
CONSOLE CABLE
.
Carefully tuck wires in mast to avoid
damage.
NOTE
: Do not pinch console
cable. Be sure the console cable
prongs are aligned and the ends are
tightly seated into each other.
E
.
Repeat step C above to assemble the
right side upright mast and console.
F.
Tighten all bolts completely.*
G
.
Once
BOLTS (D)
have been
completely tightened, insert
BOLTS
(F)
into the back of the mast and
completely tighten.
30519_Rev.1.5.indd 10-11
7/14/06 8:25:07 AM
