TOWER SYSTEM
Quick Start Guide for TWR-MCF51QM
In this Quick Start Guide, you
will learn how to set up the
TWR-MCF51QM module and run
the default demonstration.
Install the Software
and Tools
Install the P&E Micro OSBDM Drivers and
Virtual Serial Port Utilities, CodeWarrior,
Freescale MQX and any related service
packs. Installers for these tools can be
found on the DVD under Software or on
the TWR-MCF51QM website (see link
from
freescale.com/Tower
).
Configure Hardware
Connect one end of the USB
cable to the PC and the other end to the
Power/OSBDM mini-B connector on the
TWR-MCF51QM module. Allow the PC to
automatically configure the USB drivers
if needed.
Run the Demo
1. Open the P&E Terminal Utility
(Start Menu>All Programs>P&E
OSBDM OSJTAG Virtual Serial
Toolkit>Utilities>Terminal Utility).
2. Select “USB COM” port and 19200
baud. Click “Open Serial Port.”
3. Press the Reset button. A prompt
will appear in the terminal window.
4. Follow the instructions to toggle the
green and orange LEDs.
5. Press the IRQ button to move to the
capacitive touch demo. Press a few
keys in the terminal window to clear
the input buffer.
6. Touch the E1 or E2 electrodes to
change the state of the LEDs and
send a message on the terminal.
7. Press the IRQ button to move back
to the toggle LED function.
Step-by-Step Installation Instructions
STEP
1
STEP
2
STEP
3
