Freescale Semiconductor
Hardware Getting Started Guide
© Freescale Semiconductor, Inc., 09/2008. All rights reserved.
This document describes the MPC8569E-MDS-PB and its
related hardware kit. The MPC8569E-MDS-PB getting
started procedure explains and verifies the board’s basic
operation in a step-by-step format.
Settings for switches, jumpers, LEDs, and push buttons are
shown, and there are instructions for connecting peripheral
devices.
The MPC8569E-MDS-PB functions with an integrated
development environment (IDE), such as Freescale’s
CodeWarrior
™, but instructions for working with the IDE
are beyond the scope of this document.
NOTE!
The terms PEX and PCIe are interchangeable. However, as
the modules are stamped “PEX”, the document uses this term.
Contents
1 Revisions Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Definitions, Acronyms, and Abbreviations . . . . . . . . . .2
3 Related Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
4 Hardware Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . .6
5 Schematic CS and PS Views . . . . . . . . . . . . . . . . . . . . .7
6 Switch Default Settings . . . . . . . . . . . . . . . . . . . . . . . . .8
7 Connector Default Settings . . . . . . . . . . . . . . . . . . . . .15
8 Push Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
9 LED Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
10 Board Control Status Registers (BCSR)
. . . . . . . . . . .19
11 Memory Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
12 Working Environment . . . . . . . . . . . . . . . . . . . . . . . . .30
13 Getting Started Procedures . . . . . . . . . . . . . . . . . . . . .31
14 SerDes-Module Set-ups . . . . . . . . . . . . . . . . . . . . . . .33
How to Reach Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
MPC8569E-MDS-PB
Document Number: MPC8569E-MDS-PB_HGS
Rev. 3.1