MPC8349EA MDS Processor Board HW Getting Started Guide, Rev. A
Freescale Semiconductor
Page 3 of 8
Step 2: Connect plastic spacers
Plastic Spacer
Plastic Screw
Four sets of plastic spacers screw
into holes located at (approximately)
the four corners of the board.The
spacers raise and stabilize the board.
1. From under the board, insert a
spacer into one of the board's four
spacer holes.
2. Attach a female spacer onto the
male spacer.
3. Repeat for the three remaining pairs
of spacers.
Step 3: Check Switches and
Jumpers
SW5
SW2
SW7
SW4
SW6
SW3
Socket for MPC8349EA
Switches SW3,4,6,7
JP1
SW5
The MPC8349EA MDS Processor
Board has two rows of Dual-In-Line
Package (DIP) switches.The default
DIP-switch positions set-up the
MPC8349EA MDS Processor Board
clock mode as shown in the table
below:
MPC8349EA MDS Processor
Board Clock Mode
e300 Core Frequency
533 MHz
CCB
266 MHz
DDR2
(can be changed to 400MHz)
(
266 MHz
Local Bus
133 MHz
