Freescale Semiconductor MPC5565, Reference Manual

Page: 797 / 1153

Enhanced Queued Analog-to-Digital Converter (eQADC)
MPC5565 Microcontroller Reference Manual, Rev. 1.0
18-98 Freescale Semiconductor
output, which is fed to a specific input of the eQADC. The eQADC provides three multiplexed address
signals, MA0, MA1, and MA2, to select one of eight inputs. These three multiplexed address signals are
connected to all four external multiplexer chips. The analog output of the four multiplex chips are each
connected to four separate eQADC inputs, ANW, ANX, ANY, and ANZ. The MA pins correspond to the
three least significant bits of the channel number that selects ANW, ANX, ANY, and ANZ with MA0 being
the most significant bit - Refer to
Table 18-53 .
When the external multiplexed mode is selected for either ADC, the eQADC automatically creates the MA
output signals from CHANNEL_NUMBER field of a command message. The eQADC also converts the
proper input channel (ANW, ANX, ANY, and ANZ) by interpreting the CHANNEL_NUMBER field. As
a result, up to 32 externally multiplexed channels appear to the conversion queues as directly connected
signals.
Table 18-53. Encoding of MA Pins
1
1
0 means pin is driven LOW and 1 that pin is driven HIGH.
Channel Number selecting ANW, ANX, ANY, ANZ
(decimal)
MA0 MA1 MA2
ANW ANX ANY ANZ
64 72 80 88 0 0 0
65 73 81 89 0 0 1
66 74 82 90 0 1 0
67 75 83 91 0 1 1
68 76 84 92 1 0 0
69 77 85 93 1 0 1
70 78 86 94 1 1 0
71 79 87 95 1 1 1