TOWER SYSTEM
Install CodeWarrior
for Digital Signal
Controllers v8.3
CodeWarrior for Digital Signal Controllers
(DSCs) v8.3 (Special Edition 64 KB code
size limit) is included on the Getting
Started DVD. Please follow these steps.
• Insert DVD into your computer and a
menu will appear.
• Select “Install CodeWarrior.”
One install supports all DSC products.
• Follow the on-screen instructions until
installation is complete.
• When installing CodeWarrior, select
“Complete” set-up option.
For updates, please visit
freescale.com/codewarrior
Connect the USB Cable
Ensure the header J20 has a
shunt installed. In this case the on-board
MC9S08JM60 MCU operates as an
OSBDM debug interface. Connect one
end of the USB cable to the PC and the
other end to the mini-B connector on the
TWR-56F8257 module. Allow the PC to
automatically configure the USB drivers
if needed.
Try Default Demo
Application
Now you should see LEDs E0-E7 flashing
in pairs, with a period of 400 ms. Touch
with your finger one of the on-board
thermistors (RT1, RT2, RT3, RT4) placed
on each corner of the board. By touching
the thermistor, you will increase its
temperature. The change of the
Step-by-Step Installation Instructions
STEP
2
In this Quick Start Guide, you will learn how to set up the TWR-56F8257
module and run the default thermistor and LED application.
STEP
1
STEP
3
