6 Product
Notices
The Zoom ColdFire LITE Development Kit being sold by Logic is intended for
ENGINEERING
DEVELOPMENT OR EVALUATION PURPOSES ONLY
. As such, the goods being provided may
not be complete in terms of required design, marketing, and/or manufacturing related protective
considerations, including product safety measures typically found in the end product incorporating
the goods. The user assumes all responsibility and liability for proper and safe handling of the
Zoom ColdFire LITE Development Kit.
ESD
Due to the open construction of the product, it is the user’s responsibility to take any and all
appropriate precautions with regard to electrostatic discharge. The various debug header pins are
tied to actual lines on the Fire Engine and ITX baseboard. Some of them will reset the board if
they are touched directly. Be aware of this situation. Logic’s warranty does not cover product
damaged by ESD.
Approvals
This product is compliant with emissions standard EN55022 level A, and may be operated in
industrial areas as defined by national regulations. This product may require a special permit for
operation at other locations. Cases of interference at such locations need to be handled
according to the requirements of the national EMC legislation
7 Product
Registration
In order to access the latest revision of this manual, product change notifications, application
notes, schematics, and hardware specifications, please register your product online with a recent
version of Internet Explorer or Netscape.
In addition, you will be notified when Logic releases updates to your product.
Go to the Log In section on the Logic website at
http://www.logicpd.com/support/
, and create a
user account. You will receive an e-mail with your new username and password and additional
instructions. At this point, log in and complete the product registration form to gain access to
product download files.
Zoom ColdFire QuickStart Guide
14
