3 QuickStart
3.1
Inserting the Fire Engine into the Mini-ITX Lite Baseboard
Insert the Fire Engine into the Hirose connectors on the Mini-ITX Lite Baseboard.
1) Position the Fire Engine’s four white 100 pin Hirose connectors directly above the four mating
Hirose connectors on the ITX Baseboard (see picture below).
2) Firmly press the Fire Engine downward on each connector until it is fully seated.
3)
Verify that the Hirose connectors on the Fire Engine and Mini-ITX Baseboard have mated
correctly.
To remove the Fire Engine, carefully pull upwards on any chosen corner of the Fire
Engine until one of the Hirose connectors on the baseboard releases. Repeat this motion
until all four Hirose connectors are no longer mated to the ITX Baseboard and remove.
Figure 3.1 – Inserting the Fire Engine into the Mini- ITX Lite Baseboard
Zoom ColdFire QuickStart Guide
6
