KT33814UG User’s Guide Rev. 2.0 4/2013
Freescale Semiconductor
17
Accessory Board
8. (LAMPOUT) LAMP DRIVER OUTPUT 2 -
Screw Terminal 1 - Low side drive, LAMPOUT
Screw Terminal 2 - VBAT
9. (TACHOUT) TACHOMETER DRIVER OUTPUT 2 -
Screw Terminal 1 - Low side drive, TACHOUT
Screw Terminal 2 - VBAT
10. (VPP) +6.5 VOLT REGULATOR OUTPUT -
Screw Terminal 1 - VPP OUTPUT
Screw Terminal 2 - GND
11. (VCC) +5 VOLT REGULATOR OUTPUT -
Screw Terminal 1 - VCC OUTPUT
Screw Terminal 2 - GND
12. (VPROT) PRO5 VOLT REGULATOR OUTPUT -
Screw Terminal 1 - VPROT OUTPUT
Screw Terminal 2 - GND
12
Accessory Board
This kit may be used with Freescale's one of the following kits:
The KITUSBSPIDGLEVME Evaluation board (shown below) provides a USB to SPI interface that
features the MC68HC908JW32 with Dongle. It is a working hardware/software example that allows a user
to become familiar with the MC68HC908JW32 microcontroller by means of an actual useful application,
a USB to SPI and USB to parallel converter. The main function provided by this kit is to allow a PC, that
may not have a parallel port, to communicate with other Freescale Evaluation Kits, via a USB port. The
USB port is a standard feature on almost every new PC. This kit makes use of the MC68HC908JW32’s
built-in USB, SPI and parallel ports.
Figure 6.
KITUSBSPIDGLEVME Evaluation Kit
