Installing the Software and Setting up the Hardware
KT22XS4200UG Rev. 1.0
Freescale Semiconductor, Inc.
19
5.2.1
Step-by-step Instructions for Setting up the Hardware
using SPIGen
To perform the demonstration examples, the following connections and setup must be performed:
1. Ready the computer and install the SPIGen.
2. To start working with KIT22XS4200EKEVB, provide 24 V input voltage between 6.0 to 58 V, by connecting the (+) probe to
the VPWR pin, and the (-) probe to the GND pin, on the input power terminal block.
3. Apply a 5.0 V input voltage between VDD and the GND terminal.
4. Connect the load between the HS0 (or HS1) pin and the (-) terminal with the 24 V power supply.
5. Start SPIGen.
Figure 11. SPIGen GUI