manualshive.com logo in svg

Freescale Semiconductor HC05P3, User Manual

Share
Download
Freescale Semiconductor HC05P3 User Manual Download Page 9

M68HC05P3EM/D

3-9

MOTOROLA

CHAPTER 2

MMDS05 CONFIGURATION AND OPERATION

This chapter explains how to configure and use your P3EM as part of an MMDS05.  For other
parts  of  system  installation  or  configuration,  see  the  MMDS05  operations  manual
(MMDS05OM/D).  (If you will use your P3EM as part of an HC05EVS system, go to Chapter
3 for corresponding information.)

Paragraph  2.1  explains  how  to  set  P3EM  jumper  headers.    Paragraph  2.2  explains
considerations pertaining to the MCU you emulate.  Paragraph 2.3 explains remaining system
installation.

Note  that  you  can  configure  a  P3EM  already  installed  in  the  MMDS05  station  module
enclosure.  To do so, switch off station-module power, remove the panel, then follow the
guidance of this chapter.

CAUTION

Be sure to switch off power if you reconfigure an installed EM.  Reconfiguring
EM jumper headers with power left on can damage MMDS05 circuits.

2.1  SETTING P3EM JUMPER HEADERS

Your P3EM has four jumper headers, J1 through J4.  Paragraphs 2.1.1., 2.1.2. and 2.1.3
explain how to configure these headers.   

 

   

  

Freescale Semiconductor, I

                                               

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

nc.

..

Summary of Contents for HC05P3























Reviews:

No comments

Brands by name

Popular brands

Load more brands