926-75762 REV A
Connect the 56F8000E Motor Control Daughter Card and
the 56F8013 Demonstration Board to Your Computer
Additional Resources
•
Additional documentation can be found on the product’s web page; see section 4, steps 1-a. through 1-c.
•
Additional Freescale
56800/E hardware and chip documentation is available from the CodeWarrior Help menu and at:
www.freescale.com
3
Freescale and the Freescale logo are registered trademarks of Freescale Semiconductor, Inc.
1.
Plug the power supply included with the 56F8013 Demonstration Board into the 56F8000E Motor Control Daughter Card’s power
jack.
2.
Plug the +9V DC power supply into an AC outlet.
3.
Connect the JTAG adapter between your computer and the 56F8013 Demonstration Board (follow the instructions included in the
DEMO56F8013 kit).
4.
Install CodeWarrior tools (follow the instructions included in the DEMO56F8013 kit).
Run the BLDC Hall Sensor Application
1.
Download and unzip the BLDC application from the product’s web page onto your computer:
a.
Go to
www.freescale.com/dsc
b.
Under
Development Tools
, click
DEMO56F8013
c.
Scroll down to
Evaluation/Development Boards and Systems
, then click
APMOTOR56F8000E
d.
Scroll down to
Code Examples
, then click
56F8013CEBLDCHSPESLSW
2.
Open the application project
bldc_hall_pesl.mcp
in your CodeWarrior IDE.
3.
Make this project by selecting the
Project > Make
menu.
4.
Download the application into the MC56F8013 CPU by selecting the
Project > Debug
menu.
5.
Run the application by selecting the
Project > Run
menu.
6.
Repeatedly press and release the IRQ#2 (S2) button on the 56F8013 Demonstration Board to increase/decrease motor speed.
Configure the 56F8000E Motor Control
Daughter Card
The 56F8000E Motor Control Daughter Card is shipped with all jumper blocks in
the default configuration, shown in the table at right.
For more information about jumper settings, refer to the
Motor Control Demon-
stration System using the 56F8013 Demonstration Board User Guide,
56F8013MCSUG,
(located on the Resource CD-ROM)
.
Jumper Group
Connections
JG1
2 - 3, 5 - 6, 8 - 9
2
4