FREEWHEELING YOUR SCOOTER
If for reasons of convenience, or you require to push your scooter for a short
distance, the drive system can be put into "freewheel mode". This will allow your
scooter to roll freely.
Freewheel Procedure:
The freewheel device is a red lever located at the rear right hand side of your scooter.
To freewheel your scooter first switch off the power switch located on the scooter’s
control console. Pull up the disengage lever until a distinct click is felt. You can now
push your scooter with ease.
Note: in this mode with the power switch in the off position, the braking safety system
is automatically activated when the scooter is pushed quicker than walking speed,
this is an automatic ‘run away’ safety checking system, it also reduces the risk of
casual theft.
Disengage
Engage
14
Warning:
When your scooter is in freewheel mode, the braking system
is disengaged.
(1)
(2)
(3)
(4)
！
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the scooter to engage or disengage freewheel
mode. Never sit on a scooter to do this.
After you have finished pushing your scooter, always return it to the
drive mode to lock the brakes.
