manualshive.com logo in svg

FREERIDER FR1, User Instruction Manual, Page: 27 / 32

Share
Download
FREERIDER FR1 User Instruction Manual Download Page 27

CLASSIFICATION

Type 'B' indoor / with some outdoor capabilities (EN12184:1999) Class 2 (Highway 

Regulations 1988).

Maximum safe climbing angle: 6 degrees with 400 lbs weight capacity (182 kg).

Warning: 

The safe climbing angle is measured with the seat in the highest position, 

and a weight capacity of 400lbs (182 kg). The motor on your scooter is powerful 

and may be able to climb a steeper incline than the maximum safe climbing angle. 

Exceeding the safe climbing angle may put you at risk of injury. On no account must 

you attempt to climb an incline of more than 6 degrees. This will exceed the rear 

stability of your scooter.

Maximum speed: 

Up to 8 mph (13 km/h) [+/-10%] dependent on weight and 

manufacturing tolerances.

Range:

  Up to 30 miles (48.2 km) between charges under ideal conditions.

Note: 

Range varies with weight, terrain, temperature, battery condition etc. and is 

subject to manufacturing tolerances. Your battery will require a period of "breaking in" 

before they will reach their optimum capacity (up to 20 charge, discharge cycles can 

be expected) before full range is experienced. Refer to the battery charging section 

of this manual.

Tire Size: 

Front 13 inch, Rear 13 inch. pneumatic.

Batteries: 

Lead Acid battery 75AH

Charger: 

AC input.100-240 volt, 50/60Hz,

                DC output 24 volt. 8 Amp for Lead Acid battery

                Conforms to: EN60335-2-29 and EN12184

                EN12184:1999 (Clause 9.8)

                EN55022:2010, Class B

                IEC61000-4-2/ IEC61000-4-3

Radiated Radio Frequency Electromagnetic (RS): 

Field strength tested to 20V/m 

compliance.

Electrical System: 

24 volt DC 

Drive system:

 Rear wheel, direct drive via sealed drive axle

Motor:

 24 volt DC. Permanent magnet totally enclosed for outdoor use. Internal 

brushes. 3.0 Amp (no load) 70 W.4100 RPM

26

Summary of Contents for FR1

































Reviews:

No comments