1) PMR-505TX radio (with internal battery)
2) Instruction Manual
3) Smart Twin Charger with Adaptor
2 units
1 unit
1 unit
2. Equipment and Accessories Supplied
The PMR-505TX uses an internal Lithium Ion or Lithium Ion
Polymer battery which has been pre-installed.
For removal or replacement please contact your local dealer.
Unauthorised attempts to remove or replace the battery will
void your warranty and may damage your product.
3. Fitting the Batteries
To charge your radios, carefully follow these instructions.
4. Battery Charging
Charge Cradle
Adaptor Power
Plug
Power Adaptor
- Input: 150VAC
- Output: 9VDC
LED
1) Charger Installation
Connect the power adaptor to the mains power supply and
connect the adaptor power plug to the charger cradle.
The LED's are turned off.
2) Radio Cradling & Charging
Remove all radio accessories and insert your radios in the
charging compartment until you hear locking sound. The LED's
will light red and the radios will start charging. If the LED's blink
in red and green or the LED's do not light red, try again cradling
your radios until the LED's light red.
3) Charging Completed
The battery charging time is typically 12 to 15 hours. When the
battery is fully charged the charger LED's will light green.
5
