Need support?
87
Chapter 3 Module test (Required)
█
www.freenove.com
Camera
Enter following command to check if the camera is connected successfully.
ls /dev/video0
Then the device node will be shown below:
If the result above does not appear, please check the camera
and check if the camera interface is
(Note: plugging and unplugging the cable requires the Raspberry Pi to be powered off, otherwise the
camera module may be burned.)
Run program
1.
execute the cd command:
cd ~/Freenove_Robot_Dog_Kit_for_Raspberry_Pi/Code/Server
2.
Execute test.py command:
raspistill -o image.jpg
Then please open and check the generated image.jpg under
/Freenove_Robot_Dog_Kit_for_Raspberry_Pi/Code/Server.
Summary of Contents for Raspberry Pi 2 Model B
Page 35: ...Need support support freenove com 33 Chapter 0 Raspberry Pi Preparation www freenove com ...
Page 71: ...Need support support freenove com 69 Chapter 2 Assemble Robot www freenove com M3 Nut M3x12 ...
Page 98: ...Need support support freenove com 96 Chapter 4 Robot Dog www freenove com ...
